18″ 6.5 Grendel Rifle Build Kit – The Apex & Strike Eagle Product Description
This kit include a fully assembled, headspace-checked and test fired complete upper, scope, mount, a lower build kit and a magazine. It does not include a stripped lower receiver. That is an FFL item (“the firearm”). Everything else you need is included in this Rifle Build Kit and can be shipped directly to you.
Upper Details
18″ Fluted 6.5 Grendel Barrelย
- Liberty Barrelsยฎ made by Saternยฎ
- 6.5 Grendel
- 416R Stainless Steel
- Medium Contour
- 1-8 Twist 5R Rifling
- Rifle Length Gas
- 5/8ร24 Threads
- .750 Gas Block Journal
- 2lb 3oz
- Made in the USA
Grendel Hunter AR-15 Upper Receiver
- 7075 T-6 Billet Aluminum
- Black Hardcoat Anodized
- M4 Feedramps
- .250 Takedown Pin Holes
- 9.1oz
- Made in the USA
Grendel Hunter 15.3″v.3 Handguard
- Black Hardcoat Anodized
- 6061 T6 Aluminum
- 1.3โณ Inside Diameter
- Steel Barrel Nut and Retention Key
- Weight with Barrel Nut – 15oz
- Made in the USA
Built for maximum utility and rigidity. Features a full-length continuous Picatinny top rail and M-LOK slots at all seven positions around the sides for lights, lasers, and bipods.
Grendel Hunter 6.5 Grendel DLC Bolt Carrier Group
Diamond Like Carbon โ DLC is a next level coating that is even harder (~2300 HV) than nitride or nickel boron. It is smooth, easy to clean and has a deep, dark gray color.
- M16 Auto Profile Carrier made from 8620 Steel
- 4130 Steel Gas Key with properly staked Grade 8 fasteners.
- 6.5 Grendel (Type 2) | 6mm ARC | .22 ARC 9310 Steel bolt
- 4140 Steel Cam Pin and Hard Chrome Firing Pin.
- MPI
- 12oz
- Made in the USA
Optimized Extractor Tension: Excessive tension is a leading cause of malfunctions and extractor failure. We are meticulous about our extractor tension being at the โsweet spotโโensuring reliable cycling without putting unnecessary stress on the steel.
Radiused Extractor Geometry: We avoid the โsharp fangsโ found on most extractors. By having smooth corners on the extractor claw, we prevent the steel from digging into the brass case rim, ensuring the ejector can โkickโ the brass out at the exact right microsecond for a clean ejection cycle.
SLEDGHAMMER AR-15 Gas Blocking Charging Handle
Introducing the Sledgehammer AR-15 Charging Handle by Breek Arms. The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability, especially when shooting suppressed. Crafted with precision, this feature-rich charging handle offers reliable high performance and unmatched value for shooters.
Built using industry leading aerospace grade 7075-T6 aluminum, the Sledgehammer combines rugged durability with unmatched functionality. The Sledgehammer features robust latches for effortless and secure manipulation as well as a wider footprint for quick, smooth operation in any situation.
With more gas-reducing features than any other charging handle on the market, the Sledgehammer excels at porting gases away from the shooter’s face. The unique design elements effectively mitigate excess gas pressure away from the shooter’s face, enhancing the shooting experience.
Material: 7075 Aluminum
Finish: Mil-Spec Type III Hard Coat Anodized
Weight: 1.1 oz.
Made in the USA
Grendel Hunter .750 Click Adjustable Gas Block
The ultimate tool for gas regulation. This 4140 PHT steel block features 22 clicks of adjustment, allowing you to find the exact โsweet spotโ for your rifle. By restricting excess gas, you reduce bolt carrier speed, decrease internal heat, and virtually eliminate the violent โover-gassedโ feel common in many AR platforms โ especially when suppressed. The click adjustments allow you to easily switch between the perfect suppressed and unsuppressed settings or just fine tune it for specific loads.
- Gas Block Material 4140 PHT
- Gas Block Finish: Black Nitride
- Adjustment Screw Details: 303 SS, Black Nitride Finish, 1/8 Hex, 22 Clicks of adjustment with zero shutoff
- Weight: 2.2 oz
- Made in the USA
Armaspec Triad Plan B Muzzle Brake
Built for flawless compatibility with the Atlas/Plan B suppressor ecosystem, the Armaspec Triad features a precision taper and external threads to guarantee a rock-solid, repeatable lock-up. To achieve perfect timing and alignment, the system utilizes various size shims for an exact fit to your barrel. By stripping away heavy locking collars and complex moving parts, this streamlined mount drastically cuts down on overall weight while eliminating common failure points. The result is a rugged, dependable interface trusted by both professional operators and dedicated precision shooters to perform consistently in the most demanding environments.
Strike Industries Billet Ultimate Dust Cover
This is the Strike Billet Ultimate Dust Cover. Featuring their quick detach mechanism that allows you to install or remove the dust cover in under 10 Seconds. It also includes an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power.
Strike Industries Forward Assist (Extended)
With its extended length and L-shaped design, this forward assist button has been textured for a more positive feel and manipulation of your AR. The improved ergonomic control of this forward assist is a big upgrade from your average mil-spec forward assist button.
The L-shaped extension provides a larger surface area to operate and can comfortably be used both with and without gloves. Those looking to retain the functionality of a forward assist while seeking weight savings wherever they can will be pleased to learn that this SI Extended Forward Assist is made of lightweight 6061-T6 aluminum.
Material: 6061 Aluminum
Finish: Anodized
Weight: 0.2 oz
Black Nitride Rifle Length Gas Tube
- Stainless Steel
- Black Nitride Finish
- Made in the USA
Lower Build Kit Details
SI Mod-2 Carbine Stock
Introducing the Strike Industries MOD-2 Stock. The MOD-2 is ergonomic, durable, and easy to use. With a wide cheek rest and overmolded rubber buttstock pad, shooters can really dig into their shoulders for a more comfortable and stabilized shooting experience. For ease of adjusting length of pull, there is a larger lever with large textured accents for a solid grip. That same lever is also what you’ll be using to install the MOD-2 stock onto the buffer tube, or remove. No tools or strained fingers necessary! Simply pull the front of the lever downwards to install over the buffer tube with ease. The Mod-2 has a nice, snug fitment on a wide variety of buffer tubes.
Magpul MOE+ Grip
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. This AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.
Velocity AR Trigger โ Curved
The Velocity AR Trigger is a High Quality, Single Stage, Drop In trigger assembly. It is designed to make your AR feel like a bolt action rifle. With the Diamond Like Carbon Coating (DLC), these triggers not only have reduced friction, but also increased micro-hardness.
ย
Armaspec FT90 Ambidextrous Selector Switch
The FT90 is an ambidextrous 90 degree selector switch for the AR15 platform. This selector switch is incredibly smooth and has a super crisp lockup.
Strike Industries Extended Pivot/Takedown Pins
The SI Extended Pivot and Takedown Pins locks into place securely and make for easy, quick disassembly of the rifle.
Sound Mitigation Buffer โข- SMB โข GEN3
The Armaspec Gen3 Sound Mitigation Bufferโข SMB โข is a single-stage drop-in replacement for your standard buffer and spring. The Sound Mitigation Buffer โข is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation.
ย
Velocity Quick Detach End Plate
Milled from aircraft grade 6061 T6 aluminium the Velocity QD End Plate is the perfect upgrade for your AR-15 rifle. This QD End Plate is compatible with mil-spec AR-15 lower receivers. The design features a quick detach point for push button slings and a counterbore milled into the plate to help align and hold the rear takedown pin detent spring in place during installation.
ย
- Mil-Spec Buffer Tube
- Mil-Spec Mag Catch Button
- Grendel Hunter Enhanced Trigger Guard
- Cast Nut
- Small Lower Parts:
- 1 Each Mil-Spec AR-15: Selector Spring, Selector Detent, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch, Bolt Catch Roll Pin, Magazine Catch Spring, Magazine Catch, Buffer Retainer, Buffer Retainer Spring
- 2 Each Mil-Spec AR-15: Pivot/Takedown Springs, Pivot/Take Down Detents, Trigger Pins
10 Round Duramag
- Stainless Steel
- T360 Coating
- Anti-tilt Follower
- Caliber Identification Band
Scope Details
WE GOT YOUR BACKโข
The VIPยฎ Warranty isn’t just lip service; it’s our Very Important Promise to you. If your Vortexยฎ productโwhether a riflescope, red dot, rangefinder, apparel, or accessoryโbecomes damaged or defective, we’ll repair or replace it at no charge to you. It doesn’t matter how it happened, whose fault it was, or where you purchased it. If you have a problem, we promise to take care of you. Rest assured, if it wears the Vortexยฎ name, it’s covered.
ย – The Vortex Team
The VIPยฎ Warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder the performance of the product.
Vortex Strike Eagleยฎ 1-10×24 FFP
Fast in the brush. Deadly at range. The Strike Eagleยฎ 1-10×24 FFP delivers the ultimate balance of both for the serious hunter. Whether you need a true 1x field of view for fast-moving hogs in heavy cover, or the powerful 10x magnification to reach out and drop a coyote across an open pasture, this LPVO gives you the versatility to identify and confidently engage your target.
Because hunting often happens at the edges of daylight, the motion-activated illumination powers up the advanced First Focal Plane reticle the instant you shoulder your rifle. Lightweight, rugged, and compact, it is the perfect optical pairing for The Apexโbuilt to weather the elements, lighten your stalk, and ensure you never miss an opportunity when seconds count.
MOA Specifications
Magnification 1-10x Objective Lens Diameter 24 mm Focal Plane First Focal Plane Reticle EBR-8 BDC (MOA) Eye Relief 3.7″ Field of View 109.6′ – 11.5′ @ 100 yds. Turret Style Capped Tube Size 30mm Adjustment Graduation 1/4 MOA Travel Per Rotation 25 MOA Max Elevation Adjustment 110 MOA Max Windage Adjustment 110 MOA Parallax Setting 150 yds. Length 10.0″ Weight 21.6 oz.

ย
MRAD Specifications
Magnification 1-10x Objective Lens Diameter 24 mm Focal Plane First Focal Plane Reticle EBR-8 BDC (MRAD) Eye Relief 3.7″ Field of View 109.6′ – 11.5′ @ 100 yds. Turret Style Capped Tube Size 30mm Adjustment Graduation .1 MRAD Travel Per Rotation 10 MRAD Max Elevation Adjustment 32 MRAD Max Windage Adjustment 32 MRAD Parallax Setting 150 yds. Length 10.0″ Weight 21.6 oz.

Vortex Sport Cantilever 30mm Mount
The 2″ offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with performance you can believe in.
Learn More
6mm ARC 90gr vs 6.5 Grendel 115gr Barnes TAC-TX | 500 Yards
Watch the Barnes TAC-TX perform at 500 yards! We test the 115gr 6.5 Grendel and 90gr 6MM ARC in ballistic gel at 100, 300, and 500 yards.
Read More ยป
The Ultimate Varmint & Predator Bullet Test
Looking for the ultimate predator round? We test 6mm ARC and 6.5 Grendel ballistics, comparing V-MAX and ELD-VT varmint bullets in gel tests.
Read More ยป
6.5 Grendel 129gr AccuBond LR – The Ultimate Hunting Load?
Is the 6.5 Grendel a true 400-yard round? We test 129gr AccuBond LR gel expansion at 100 & 425 yards to see if it hits the 1,000 ft-lb ethical energy threshold.
Read More ยป
6.5 Grendel Ballistics – 120gr Nosler Ballistic Tip
6.5 Grendel Ballistics | 120gr Nosler Ballistic Tip Caliber: 6.5 Grendelย |ย Barrel Length: 22โย |ย Test Distance: 100, 275 & 375 Yards Bullet: 120gr Nosler Ballistic Tip (.458
Read More ยป
Will my upper come assembled and test fired?
Yes. This is a complete, fully assembled and test fired upper.
Will my upper receive a headspace check?
Yes. For every upper we build, we take that specific barrel and bolt and perform a headspace check prior to assembly.
What is the lead time on an upper?
We ship the same or next business day. Since our website has a live inventory and we only sell things that actually exist on our shelves, we do not have lead times.ย
Playlist
Upper Details
18″ Fluted 6.5 Grendel Barrelย
- Liberty Barrelsยฎ made by Saternยฎ
- 6.5 Grendel
- 416R Stainless Steel
- Medium Contour
- 1-8 Twist 5R Rifling
- Rifle Length Gas
- 5/8ร24 Threads
- .750 Gas Block Journal
- 2lb 3oz
- Made in the USA
Grendel Hunter AR-15 Upper Receiver
- 7075 T-6 Billet Aluminum
- Black Hardcoat Anodized
- M4 Feedramps
- .250 Takedown Pin Holes
- 9.1oz
- Made in the USA
Grendel Hunter 15.3″v.3 Handguard
- Black Hardcoat Anodized
- 6061 T6 Aluminum
- 1.3โณ Inside Diameter
- Steel Barrel Nut and Retention Key
- Weight with Barrel Nut – 15oz
- Made in the USA
Built for maximum utility and rigidity. Features a full-length continuous Picatinny top rail and M-LOK slots at all seven positions around the sides for lights, lasers, and bipods.
Grendel Hunter 6.5 Grendel DLC Bolt Carrier Group
Diamond Like Carbon โ DLC is a next level coating that is even harder (~2300 HV) than nitride or nickel boron. It is smooth, easy to clean and has a deep, dark gray color.- M16 Auto Profile Carrier made from 8620 Steel
- 4130 Steel Gas Key with properly staked Grade 8 fasteners.
- 6.5 Grendel (Type 2) | 6mm ARC | .22 ARC 9310 Steel bolt
- 4140 Steel Cam Pin and Hard Chrome Firing Pin.
- MPI
- 12oz
- Made in the USA
SLEDGHAMMER AR-15 Gas Blocking Charging Handle
Finish: Mil-Spec Type III Hard Coat Anodized
Weight: 1.1 oz.
Made in the USA
Grendel Hunter .750 Click Adjustable Gas Block
The ultimate tool for gas regulation. This 4140 PHT steel block features 22 clicks of adjustment, allowing you to find the exact โsweet spotโ for your rifle. By restricting excess gas, you reduce bolt carrier speed, decrease internal heat, and virtually eliminate the violent โover-gassedโ feel common in many AR platforms โ especially when suppressed. The click adjustments allow you to easily switch between the perfect suppressed and unsuppressed settings or just fine tune it for specific loads.
- Gas Block Material 4140 PHT
- Gas Block Finish: Black Nitride
- Adjustment Screw Details: 303 SS, Black Nitride Finish, 1/8 Hex, 22 Clicks of adjustment with zero shutoff
- Weight: 2.2 oz
- Made in the USA
Armaspec Triad Plan B Muzzle Brake
Strike Industries Billet Ultimate Dust Cover
Strike Industries Forward Assist (Extended)
Finish: Anodized
Weight: 0.2 oz
Black Nitride Rifle Length Gas Tube
- Stainless Steel
- Black Nitride Finish
- Made in the USA
Lower Build Kit Details
SI Mod-2 Carbine Stock
Introducing the Strike Industries MOD-2 Stock. The MOD-2 is ergonomic, durable, and easy to use. With a wide cheek rest and overmolded rubber buttstock pad, shooters can really dig into their shoulders for a more comfortable and stabilized shooting experience. For ease of adjusting length of pull, there is a larger lever with large textured accents for a solid grip. That same lever is also what you’ll be using to install the MOD-2 stock onto the buffer tube, or remove. No tools or strained fingers necessary! Simply pull the front of the lever downwards to install over the buffer tube with ease. The Mod-2 has a nice, snug fitment on a wide variety of buffer tubes.
Magpul MOE+ GripThe MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. This AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. |
Velocity AR Trigger โ Curved
The Velocity AR Trigger is a High Quality, Single Stage, Drop In trigger assembly. It is designed to make your AR feel like a bolt action rifle. With the Diamond Like Carbon Coating (DLC), these triggers not only have reduced friction, but also increased micro-hardness.
ย
Armaspec FT90 Ambidextrous Selector Switch
The FT90 is an ambidextrous 90 degree selector switch for the AR15 platform. This selector switch is incredibly smooth and has a super crisp lockup.
Strike Industries Extended Pivot/Takedown PinsThe SI Extended Pivot and Takedown Pins locks into place securely and make for easy, quick disassembly of the rifle. |
Sound Mitigation Buffer โข- SMB โข GEN3The Armaspec Gen3 Sound Mitigation Bufferโข SMB โข is a single-stage drop-in replacement for your standard buffer and spring. The Sound Mitigation Buffer โข is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation. |
ย
Velocity Quick Detach End PlateMilled from aircraft grade 6061 T6 aluminium the Velocity QD End Plate is the perfect upgrade for your AR-15 rifle. This QD End Plate is compatible with mil-spec AR-15 lower receivers. The design features a quick detach point for push button slings and a counterbore milled into the plate to help align and hold the rear takedown pin detent spring in place during installation. |
ย
- Mil-Spec Buffer Tube
- Mil-Spec Mag Catch Button
- Grendel Hunter Enhanced Trigger Guard
- Cast Nut
- Small Lower Parts:
- 1 Each Mil-Spec AR-15: Selector Spring, Selector Detent, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch, Bolt Catch Roll Pin, Magazine Catch Spring, Magazine Catch, Buffer Retainer, Buffer Retainer Spring
- 2 Each Mil-Spec AR-15: Pivot/Takedown Springs, Pivot/Take Down Detents, Trigger Pins
10 Round Duramag
|
Scope Details
WE GOT YOUR BACKโข
The VIPยฎ Warranty isn’t just lip service; it’s our Very Important Promise to you. If your Vortexยฎ productโwhether a riflescope, red dot, rangefinder, apparel, or accessoryโbecomes damaged or defective, we’ll repair or replace it at no charge to you. It doesn’t matter how it happened, whose fault it was, or where you purchased it. If you have a problem, we promise to take care of you. Rest assured, if it wears the Vortexยฎ name, it’s covered.
ย – The Vortex Team
The VIPยฎ Warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder the performance of the product.
Vortex Strike Eagleยฎ 1-10×24 FFP
Fast in the brush. Deadly at range. The Strike Eagleยฎ 1-10×24 FFP delivers the ultimate balance of both for the serious hunter. Whether you need a true 1x field of view for fast-moving hogs in heavy cover, or the powerful 10x magnification to reach out and drop a coyote across an open pasture, this LPVO gives you the versatility to identify and confidently engage your target.
Because hunting often happens at the edges of daylight, the motion-activated illumination powers up the advanced First Focal Plane reticle the instant you shoulder your rifle. Lightweight, rugged, and compact, it is the perfect optical pairing for The Apexโbuilt to weather the elements, lighten your stalk, and ensure you never miss an opportunity when seconds count.
MOA Specifications
| Magnification | 1-10x |
|---|---|
| Objective Lens Diameter | 24 mm |
| Focal Plane | First Focal Plane |
| Reticle | EBR-8 BDC (MOA) |
| Eye Relief | 3.7″ |
| Field of View | 109.6′ – 11.5′ @ 100 yds. |
| Turret Style | Capped |
| Tube Size | 30mm |
| Adjustment Graduation | 1/4 MOA |
| Travel Per Rotation | 25 MOA |
| Max Elevation Adjustment | 110 MOA |
| Max Windage Adjustment | 110 MOA |
| Parallax Setting | 150 yds. |
| Length | 10.0″ |
| Weight | 21.6 oz. |
MRAD Specifications
| Magnification | 1-10x |
|---|---|
| Objective Lens Diameter | 24 mm |
| Focal Plane | First Focal Plane |
| Reticle | EBR-8 BDC (MRAD) |
| Eye Relief | 3.7″ |
| Field of View | 109.6′ – 11.5′ @ 100 yds. |
| Turret Style | Capped |
| Tube Size | 30mm |
| Adjustment Graduation | .1 MRAD |
| Travel Per Rotation | 10 MRAD |
| Max Elevation Adjustment | 32 MRAD |
| Max Windage Adjustment | 32 MRAD |
| Parallax Setting | 150 yds. |
| Length | 10.0″ |
| Weight | 21.6 oz. |
Vortex Sport Cantilever 30mm Mount
The 2″ offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with performance you can believe in.
Learn More

6mm ARC 90gr vs 6.5 Grendel 115gr Barnes TAC-TX | 500 Yards
Watch the Barnes TAC-TX perform at 500 yards! We test the 115gr 6.5 Grendel and 90gr 6MM ARC in ballistic gel at 100, 300, and 500 yards.

The Ultimate Varmint & Predator Bullet Test
Looking for the ultimate predator round? We test 6mm ARC and 6.5 Grendel ballistics, comparing V-MAX and ELD-VT varmint bullets in gel tests.

6.5 Grendel 129gr AccuBond LR – The Ultimate Hunting Load?
Is the 6.5 Grendel a true 400-yard round? We test 129gr AccuBond LR gel expansion at 100 & 425 yards to see if it hits the 1,000 ft-lb ethical energy threshold.

6.5 Grendel Ballistics – 120gr Nosler Ballistic Tip
6.5 Grendel Ballistics | 120gr Nosler Ballistic Tip Caliber: 6.5 Grendelย |ย Barrel Length: 22โย |ย Test Distance: 100, 275 & 375 Yards Bullet: 120gr Nosler Ballistic Tip (.458
Will my upper come assembled and test fired?
Yes. This is a complete, fully assembled and test fired upper.
Will my upper receive a headspace check?
Yes. For every upper we build, we take that specific barrel and bolt and perform a headspace check prior to assembly.
What is the lead time on an upper?
We ship the same or next business day. Since our website has a live inventory and we only sell things that actually exist on our shelves, we do not have lead times.ย




















Reviews
There are no reviews yet.